cancel
Showing results for 
Search instead for 
Did you mean: 

Co-simulation with NX Motion and Matlab/Simulink

Experimenter
Experimenter

 

Hello!

I have a question regarding if it’s possible to do a co-simulation between Nx Motion (Nx version 11) and matlab/Simulink (any version). Or do I need to get earlier version of Nx like 10 or 9?

 

Best regards

Bjorn

6 REPLIES

Re: Co-simulation with NX Motion and Matlab/Simulink

Siemens Phenom Siemens Phenom
Siemens Phenom

Re: Co-simulation with NX Motion and Matlab/Simulink

Siemens Creator Siemens Creator
Siemens Creator

Co-simulation NX Motion with MATLAB-Simulink is available in NX11.

Please refer to Simcenter Motion Systems and Controls. There are 2 types of co-simulation available:

- Simcenter Motion solver as the Master (BDF method)

- MATLAB/Simulink as the master. The Simcenter Motion model is integrated as S-function. You can have 2 of them at the same time.

https://www.plm.automation.siemens.com/en_us/products/simcenter/3d/motion-analysis/co-simulation.sht...

Please contact your Siemens PLM sales representative for more details. Keep me in the loop as you want.

 

Gilles Dubourg

Product Manager - Simcenter 3D Motion

Product Lifecycle Management 

Siemens Industry Software SAS

gilles.dubourg@siemens.com

 

 

 

 

Gilles Dubourg
Product Manager – Simcenter 3D Motion
Product Lifecycle Management
Siemens Industry Software SAS
gilles.dubourg@siemens.com
www.siemens.com/plm

Re: Co-simulation with NX Motion and Matlab/Simulink

Experimenter
Experimenter

Thank you Gilles Dubourg for answering. I just have one question:

Is there a preferred version of Matlab which I should be using or does it not matter which version I use. 

 

best regards 

Bjorn 

Re: Co-simulation with NX Motion and Matlab/Simulink

Experimenter
Experimenter

I am trying to do the exercise in learning advantage for  Running a co-simulation using Simulink and im getting this error message:
"ERROR - Unable to initialize - NX Motion CoSimulation status was 3615094
NO error text found for error 3615094"

 

What are I'm doing wrong?

 

Best regards

 

Bjorn

Re: Co-simulation with NX Motion and Matlab/Simulink

Siemens Creator Siemens Creator
Siemens Creator

The Simcenter Motion Solver supports LMS Imagine.Lab Amesim version 14.2, as well as MATLAB Simulink versions R2014a, R2014b, and R2015a

 

Refer to the documentation:

https://docs.plm.automation.siemens.com/tdoc/nx/11/nx_help#uid:xid1095061

Best regards,

Gilles

 

Gilles Dubourg

Product Manager – Simcenter 3D Motion

Product Lifecycle Management

Siemens Industry Software SAS

gilles.dubourg@siemens.com

www.siemens.com/plm

Gilles Dubourg
Product Manager – Simcenter 3D Motion
Product Lifecycle Management
Siemens Industry Software SAS
gilles.dubourg@siemens.com
www.siemens.com/plm

Re: Co-simulation with NX Motion and Matlab/Simulink

Siemens Creator Siemens Creator
Siemens Creator

Please contact your GTAC support concerning the error. If not already documented, we'll need to track, record and solve the issue.

Thanks in advance,

Gilles

 

Gilles Dubourg

Product Manager – Simcenter 3D Motion

Product Lifecycle Management

Siemens Industry Software SAS

gilles.dubourg@siemens.com

www.siemens.com/plm

Gilles Dubourg
Product Manager – Simcenter 3D Motion
Product Lifecycle Management
Siemens Industry Software SAS
gilles.dubourg@siemens.com
www.siemens.com/plm