In the SELECTOR ENTITY toolbar choose NODE, then in the SELECTOR MODE activate SHOW TOOLTIPS, from now in advance each time you hover on a NODE in an active window with displacements or stress results you will get a balloon with a summary of the results.
TRICK: If you move the mouse fully inside over the text balloon and click the RMB you will see the option CONVERT TO TEXT, allowing you to have the balloon converted to text. Next use command MODIFY > EDIT > TEXT and made the modifications you like in both text content, color, position, etc..
thank you for quick reply.
For Translation results works well, but for stress results, there are no text with value.
See bellow. There are only coord.
Is possible cennect text window with node by leader?
If you plot elemental stress results, then choose ELEMENT in the SELECTOR ENTITY, not nodal stress results are plotted.
Edit the text and in the STYLE include POINTER, then you can point to any place of the screen. Also learn to play with text justification or text position: VIEW vs. MODEL.
nodal/element contour = my fault :-)
Now its OK.
Good news for our potencial customer.
Now he will buy FEMAP.
It was his last requirement.