I would like to know if it possible to run several analysis sequentially. That is. After one finishes it starts the next one. .I have done the *.bat file and tried several things like MS dos command start/wait.... but nothing works. I did not find anything in nastran keywords. Until now once I launch the *.bat both analyses start at the same time
"C:\Archivos de programa\FEMAP_11_2_2\nastran\bin\nastran64w.exe" C:\Users\Jon\oceantec\FEM\prueba_lanzar_nastran\model_ballast_detail_size_25-000.dat
"C:\Archivos de programa\FEMAP_11_2_2\nastran\bin\nastran64w.exe" C:\Users\Jon\oceantec\FEM\prueba_lanzar_nastran\model_floater_detail_size_80-003.dat
Thanks in advance
Solved! Go to Solution.
If you are working on Windows, you have to generate a *.bat file like run-jon.bat (on Unix/Linux a Shell Script) with the following content:
nastran caso1.dat bat=no
nastran caso2.dat bat=no
nastran caso3.dat bat=no
Of course, you can add additional nastran keywords (mem=4gb, parallel=8, etc..). Also make sure that nastran.exe is in your PATH, if not add the PATH in the BATCH file.
On Windows, the batch keyword is ignored and Nastran always runs in the foreground. A BATCH file containing the following lines will run each of the 3 jobs sequentially:
On Linux, the default is to run the process in the background (i.e., batch=yes), so the above commands would result in all 3 jobs running simultaneously. If you add bat=no, then they will run sequentially.
I understand you are running FEMAP, then remember that in your nastxx.rcf results file under <Femap-dir>\nastran\conf directory you have a lot of nastran keywords already defined, like prog=FEMAP, this tells to the nastran solver that the model was created in FEMAP, then no need to issue it again in the command line.
To learn more take a look to my blog in the following address: https://iberisa.wordpress.com/2014/01/03/requisitos-hardware-de-nx-nastran/
You are using a bad nastran executable, "nastran64w.exe" is for launching the solver from a window in the deskop of Windows OS, simply use nastran.exe and you are done!!. Here you are the correct BATCH file edited (to make things short include C:\Archivos de programa\FEMAP_11_2_2\nastran in the PATH of you Windows OS):
"C:\Archivos de programa\FEMAP_11_2_2\nastran\bin\nastran.exe" model_ballast_detail_size_25-000.dat
"C:\Archivos de programa\FEMAP_11_2_2\nastran\bin\nastran64w.exe" model_floater_detail_size_80-003.dat