Showing results for 
Search instead for 
Did you mean: 

revolved quad mesh not touching surface



I revolved a quad mesh into a solid and have it all associated to the solid except for the white surface below.  How can I fix this?


revolve missed face.PNG


Re: revolved quad mesh not touching surface

Siemens Phenom Siemens Phenom
Siemens Phenom

If you used the command, Modify > Associativity > Automatic command, you may need to loosen the value of the Search Tolerance in the Automatic Geometry Associativity dialog box.

Best Regards,
Chip Fricke
Principal Applications Engineer - Femap Product Development