Showing results for 
Search instead for 
Did you mean: 

New Changes to Community Design

Community Admin Community Admin
Community Admin

I am very excited to announce that we have completed phase 2 of our ongoing Community Redesign project! Many of you can probably remember phase 1 and how awesome it was, considering what our old design looked like. Smiley Wink It was a big change for all of us, but quite necessary, and I think we can all agree that it was for the better. This time around, the changes were relatively subdued but I want to highlight some of the more important ones. 



One of the very first things you will notice is a new look for the page header. This area has been completely streamlined with the removal of several unnecessary links and the image being pushed out. Header images will now decrease in size as you drill down into the different interaction styles. The header image will be largest at the category level, a little smaller at the forum or blog level, and finally disappear when reading an article or discussion. You will also notice that the search box now has square corners, versus the previously rounded corners.



Many interaction styles underwent changes, but perhaps the most significant changes were applied to our blogs. You will notice that we switched back to the masonry/card style that we had before we did Phase I of the redesign. This allows for easier browsing of articles at the general blog level. Sometimes you change things, and you realize that they were better the first time around!


Read/Unread Distinction

Another change that many of you will be happy about is a much clearer distinction of what posts you've read, and what are still unread. In the forums, you could always figure this out by seeing if the topic link was bold or not. That's not quite the best method, so we've added a colored stripe to the very left of each unread topic. If the stripe is there, you have new content to enjoy! Additionally, the knowledge base area has colored icons to denote read or unread, but they weren't working properly. That issue has been fixed.



Last, but certainly not least, we have finally made the jump to mobile! Previously, there were display issues that rendered the Community completely unusable on mobile or tablet devices. Thoses issue were an important piece to starting another phase of the redesign project, and I am happy to report that we have a completely usable (hopefully) and beautiful mobile-friendly skin for the Community.


I encourage everyone to go poke around and see what else has changed. There has been extensive testing done by yours truly, but I am only one person. If you notice any bugs, issues, or frankly, ugly things, please let me know! Positive feedback accepted as well. I really do rely on your reports to make the Community a better place. Smiley Happy



Gears Esteemed Contributor

Saw the "Get Link" button besides the "post a comment" button and hoped to have it for regular forum posts too, but there is none.

Would be nice to have them to copy the link to an individual post directly from within the browser Smiley Wink

Community Admin

@Stefan_Pendl Good question! There isn't the same button, but you can still get the direct URL of a forum message. On any message, click the three "..." and select "Highlight". This will give you what you're looking for. Sorry about the  button! I'll make note of it for a possible phase III. Smiley Wink

Highlighting a post.PNG



Gears Esteemed Contributor

Thanks for the information Katie, will check how this works out.

Thanks for the updated look and feel, which has resolved many display issues especially on the main community page Smiley Wink

Have a pleasant weekend.


Glad to see changes.

I noticed that the Read more... links are not working in the SE Blog area. I'm use MS Edge browser.

Gears Esteemed Contributor

Hi Katie,

I can confirm that highlight gives me a link to the selected post instead of the entire thread Smiley Wink

Community Admin

@RyanM Thanks for letting me know! I'll pass it along to be fixed. Smiley Happy



I am an experienced CAD user (SolidWorks) bu I am new to SolidEdge.  I am also new to Synchronous (whatever that is, however I think I have some idea) technology.  I am trying to do things in SolidEdge that I used quite frequently in SolidWorks but I am having a lot of trouble with it.  We don't have any support for SolidEdge at my employer & I don't know who the local SolidEdge distributor/reseller is.  I have looked in the F1 help files & what I am looking for is either not there or it isn't explained very well (don't understand).  I am also new to the SolidEdge community and don't even know who/where to ask questions.  From what I have seen/experienced up until now with SolidEdge, it is not easy to use.  I like SolidWorks much better but I am stuck with SolidEdge as that is all I have availiable to me.  What now?


Thank you,