From my understanding only the main dialog page allows to generate the tool path to make sure that the settings of the sub-dialogs are really saved.
Production: NX10.0.3, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0
Employees of the customers, together we are strong
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide
I think that it is not possible, but you have the possibility of customizing your dialog box (adding functions which is in the parameters of cuts to have directly the generated button), but can be that you already know this solution
Production: NX184.108.40.206,VERICUT 8.1.2
Development: Tcl/Tk, Gnuplot
To my knowledge in NX11.0.1. there is a new UI:
I think, this is what you want.
We have been waiting for this opportunity for years. But now we can't use it because this realease does not work in (our) Teamcenter.
Please correct me if that's not true...
You can only generate from the main operation dialog. When you are in a sub-dialog, such as Non Cutting Moves, the changes you make must be saved by [OK] in the sub-dialog, which returns you to the main dialog. So the trick is to access the NCM settings from the main dialog, without using the sub dialog. There are 2 options that I know of.
With the traditional dialogs, you can add NCM items to the main dialog, such as Open Area. Then you can for example, change the engage type and generate, all from the main dialog. If you find yourself always adjusting the same few items, this is a good option.
The new explorer dialog layouts also allow you to access NCM settings feom the main dialog, without going to a sub dialog. Going forward, as these are implemented, this should be less of an issue. Here is one user example:
See that Generate and the other Action buttons are available :*)
Is it some settings to "activate" this new explorer view layout as standard for all operations,
or do I need to do customising for every operations ?
Today, the explorer block and nodes are available in customize dialog. This is the first step. There are no OOTB dialogs set up this way yet - that is still being planned. But you are welcome to experiment - there is info in the NX 11.0.1 documentation .
The customization with the Explorer Nodes is really good but I have just one matter. Because I can't find all
options from dialog box from cutting parameters and Non cutting parameters. (Eg. pre drill pint, smoothing and some more)
That meaning is i can't add this the main window and I need still the buttons for these boxes and I have everything double.
Is there a way where I can find all options that I can include in the main window??
Thank you in advance