Cancel
Showing results for 
Search instead for 
Did you mean: 

HOW TO: CHANGE FANUC5 AXIS POST AND SIMULATION FOR SIM8 OOTB POST FOR G53.1 CODE?

Creator
Creator

When using Fanuc Sim08... 5 axis table/table post in Machine code simualtion: 

 

G88.2 X_Y_Z_I_J_K_ line defines CSYS shift and rotation and must be followed with 

G53.1  which activates new CSYS as specified in previous line. 

 

OOTB post simulates line G53.1 as tool movement line.

Machine does not move when G53.1 is executed, it just activates new CSYS! Next movement line liek G0 or G1 actually move macine in new CSYS. 

 

What would have to be cahnged in the Post or where else to make simulation thru to machine run?

 

thank you,

Mirko

Learn online





Solution Information