Cancel
Showing results for 
Search instead for 
Did you mean: 

How to indicate the y center for barrel tool?

Solution Partner Pioneer Solution Partner Pioneer
Solution Partner Pioneer

Hi,

 

I wanted to create the barrel-shape tool but I do not know how to get the value for Y center. Does anyone know to get the value?

 

*Attached is the tool dimension from EMUGE Franken

3.PNG

1 REPLY 1

Re: How to indicate the y center for barrel tool?

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor
Ycenter = l2 / 2

Hope this helps. If not, you may contact the tools vendor.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX12.0.2, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX (1876) | AWC 3.4 Preparing: -

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Learn online





Solution Information