Cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

I Can Not Access Manufacturing NX11

Experimenter
Experimenter

Hello,

When I try to access the manufacturing it simply exits and no error appears.

 

NX version 11.0.0.33

5 REPLIES 5

Re: I Can Not Access Manufacturing NX11

Legend
Legend

It looks like there are problems in your configuration or tcl-Files.

For more information look in the log-File

Re: I Can Not Access Manufacturing NX11

Experimenter
Experimenter

thanks,

 

this log file ?

What would be the solution?

 

TCL-UG.JPG

 

 Admin note: Log file removed

Re: I Can Not Access Manufacturing NX11

PLM World Member Phenom PLM World Member Phenom
PLM World Member Phenom

Looks like your calling a template file that does not exist.

 

From your log file

"unable to create template caused by invalid file spec Z:\CAM\NX_PADRAO\template_set\cam_general.opt"

Look in the .opt file and see if the dir path and .prt files defined ther really exist.

 

 

John Joyce, Manufacturing Engineer,
Senior Aerospace

NX 11.0.2.7 Vericut 8.0.3 - Statements and opinions are mine alone and do not reflect
the opinion of my employer or any other member of the human race

Re: I Can Not Access Manufacturing NX11

Experimenter
Experimenter

Solved,

 

 
wrong network mapping
 
Thank you very much,
Smiley Happy

Re: I Can Not Access Manufacturing NX11

PLM World Member Phenom PLM World Member Phenom
PLM World Member Phenom
Your welcome

Been there done that
John Joyce, Manufacturing Engineer,
Senior Aerospace

NX 11.0.2.7 Vericut 8.0.3 - Statements and opinions are mine alone and do not reflect
the opinion of my employer or any other member of the human race

Learn online





Solution Information