Cancel
Showing results for 
Search instead for 
Did you mean: 

Installation of Post Processor

Solution Partner Valued Contributor Solution Partner Valued Contributor
Solution Partner Valued Contributor
Hello all,

How to install a post processor in users pc..i have 4 files....
.def
.tcl
.cdl
.pui.


How to configure these in users pc?
5 REPLIES

Re: Installation of Post Processor

Valued Contributor
Valued Contributor

Hi,

 

Run NX as administrator, get in NX Manufacturing Mode, and type "install" in command finder.

 

1.png

 

Highlighted

Re: Installation of Post Processor

Valued Contributor
Valued Contributor

1- copy those files to c:/program files/siemens/ NX xx.x/mach/resources/postprocessor folder.

2- open "template_post.dat" file with notepad or worpad

3-write this string template :

" what name do you want to see in nx,${UGII_CAM_POST_DIR}postname.tcl,${UGII_CAM_POST_DIR}postname.def "

Re: Installation of Post Processor

Solution Partner Valued Contributor Solution Partner Valued Contributor
Solution Partner Valued Contributor

Thanks @dfdfgs...for your reply Smiley Happy and when i tried this it was asking for .pui file ,...what about the other files ..Those are not necessary

 

 

 

Re: Installation of Post Processor

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

All four files, Tcl, Def, Cdl and Pui, are mandatory.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: Installation of Post Processor

Solution Partner Valued Contributor Solution Partner Valued Contributor
Solution Partner Valued Contributor
Thanks @alicanydogan Smiley Happy with detailed step by step procedure.


Learn online





Solution Information