I'm working on my own Kinematic Model for NX simulation and I'm having a problem.
First let me explain, which type of machine I'm trying to simulate.
The milling machine is an 3 axis HORIZONTAL milling centre.
X- & Y-axis are on tool-side and the Z-axis is on part-side.
See this picture:
Yellow is the Z-axis (of the Machine Tool Builder) which will move along the X-axis off the Assembly.
Green is the X-axis (of the Machine Tool Builder) which will move along the Y-axis off the Assembly.
Red is the Y-axis (of the Machine Tool Builder) which will move along the Z-axis off the Assembly.
Now i'm wondering how do I need to define my Machine_zero_junction, Part_mount_junction & Tool_mount_junction?
Thanks in advanced!