Showing results for 
Search instead for 
Did you mean: 

NX 10.0.1, when?


We are about to update from NX8.5.3 to NX9.0.3 in a couple of months, is it worth?


When is NX 10.0.1 scheduled?


Re: NX 10.0.1, when?

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

To my knowledge NX 10.0.1 should be released in/after March 2015.


I would skip NX 9.0.3, if the move is planned in a few months.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 ( | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: NX 10.0.1, when?


Yup, we're skipping NX9.  They too close to eachother to be worth the trouble.  Waited for NX9 to be little polished out and NX10 is already here.  If you install NX9 and have problems all you will hear is: NX10 will fix it.



Re: NX 10.0.1, when?

I would go directly to 10.0.1, which you should see in a matter of days.

Mark Rief
Retired Siemens

Re: NX 10.0.1, when?

I'm excited for 10.0.1...

Lots of copy paste issues in 10.0.0

Dennis Rathi
Creations Unlimited

Re: NX 10.0.1, when?

                   [ Siemens PLM Software ]

                S O F T W A R E                 SFB-NX-8854
                F I E L D                       Page 1 of 1
                B U L L E T I N                 Issue Date: February 27, 2015
                                                Revision Date: N/A
                                                Supersedes: N/A
                                                Submitted By: Chris Smith
                                                Responsible Group: NX Rel Mgmt
                                                GTAC 800 # Options(s): 2-1

   SUBJECT:  Maintenance Release NX 10.0.1 is now available
   Affected Software: NX 10.0
   Associated PR Number(s): N/A
   Scope: Windows 64-Bit, Linux 64-Bit & Mac OS
   Revision: N/A

   Dear Siemens PLM Customer,
   We are pleased to inform you that Maintenance Release NX 10.0.1 is now
   available for download from the Siemens PLM download server.  NX 10.0.1 is
   an accumulation of fixes built for installation on top of Windows 64-Bit,
   Linux 64-Bit and Mac OS images of NX 10.0.0.
   NX10.0.1 also includes an update for the documentation which provides
   updates to the Release Notes, What’s New and NX Help.
   Please note that this Maintenance Release will only be shipped (on DVD)
   by request.
   Select the following link to download this Maintenance Release or to review
   the README.  Note: A valid WebKey account is required. 
      Windows 64-Bit:
      Linux 64-Bit:
      Mac OS:
   Please refer to the README file for Maintenance Release installation
   If you experience any problems with the installation of this Maintenance
   Release, please contact your local Siemens PLM Software support office.
   Siemens Product Lifecycle Management Software Inc.
   Industry Sector

   If any questions arise regarding this field bulletin, the
   Global Technical Access Center may be contacted at:
               All USA & Canada                (800) 955-0000
   If you are outside the United States and Canada, any questions
   regarding this or any other SFB should be directed to your local
   support office, quoting the SFB number.

   To unsubscribe from the SFBMAIL mailing list, click here.


Mark Rief
Retired Siemens

Learn online

Solution Information