NX12 CAM Tool_Path_Drive (Countour Milling)
With some geometry 3D we can't use Cavity milling,Fix Contour ,Area Milling for this image ,But we can use combine Toolpath 2D ( Planar Milling ) + Specify Cut Are of Fix Countour ( Tool Path Drive) for manufacturing this part.
Link Exercise : https://rapidgator.net/file/7436b32db4b51057b8056bbf6e2e0600
I tried to do it with Contour area and it works fine.
Here is a picture of my output. Is it what you want
This looks strangly familiar to an excersise I did for Cadpo (now TATA) I get it course many years ago. Try Z - level