Cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

NX12 Operation Template Customization - Attributes CAM_TEXT, etc.

Legend
Legend

Hi,

 

I am just looking into our hole_making.prt (etc.) customizations in NX12.0.1.7.

 

In one case we create a new operation with different name and description. In previous releases there were the properties CAM_TEXT, CAM_TEXT2, CAM_TEXT3 and CAM_TOOLTIP.

In NX12.0.1.7 there is a CAM_TEXT attribute with the value "KEYSmiley SurprisedPERATION_DRILLING".

 

Does anybody know where the key is referring to? I couldn´t find anything in the NX help about this key-value concept

 

Thanks!

Best wishes,
Joachim

In production NX 12.0.1.7 MP4
In testing NX 12.0.2.9 MP5
5 REPLIES 5

Re: NX12 Operation Template Customization - Attributes CAM_TEXT, etc.

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

I would say that this will be read from a language resource file for easier translation.

You could check if the translation meets the one contained in the file "%UGII_BASE_DIR%\LOCALIZATION\translations\german\libcamsutilint_german.txt", which contains the "OPERATION_DRILLING" key Smiley Wink

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: NX12 Operation Template Customization - Attributes CAM_TEXT, etc.

Legend
Legend
Hi Stefan,

I didn´t think about that. Just looked at MACH\localization\ which was obviously wrong.

Thanks a lot!
Best wishes,
Joachim

In production NX 12.0.1.7 MP4
In testing NX 12.0.2.9 MP5

Re: NX12 Operation Template Customization - Attributes CAM_TEXT, etc.

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

Currently everything is scattered around the folder structures.

The rule of thumb would be to first check the general localization folder, afterwards the one of the application.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: NX12 Operation Template Customization - Attributes CAM_TEXT, etc.

Valued Contributor
Valued Contributor

What about the english file?

Re: NX12 Operation Template Customization - Attributes CAM_TEXT, etc.

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

There is no English file, since the source code contains the English text.

Read about translation and localization in the NX documentation.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Learn online





Solution Information