Just a note to let you know we are hosting a live Tech Tip webinar on Tues, June 7, at 12:00 (noon) Eastern time.
The topic will be an introduction of DNC Connect for NX, a new capability that lets you save your native NX data to the managed database for shop floor DNC. Ralf Stetter will be our presenter.
The Tech Tip already has a Knowledge Base (KB) article at: https://community.plm.automation.siemens.com/t5/Tech-Tips-Knowledge-Base-NX/Connect-your-native-NX-t...
It has been a while since we held a live event for our Tech Tips and some of you have let us know that you miss the live sessions. So we are going to try hosting and promoting the events exclusively in the NX for Manufacturing Forum, using Google Hangouts on Air. You can view the event right from the KB article page, or open it in YouTube.
We hope to see you there!
@dystryr - Thanks for the question - we'll be sure to answer this in the session.
@MrJSON - not sure what was happening with that link to the Knowledge Base article. It seems to be fixed now. If for some reason that link flakes out again, you can find the article by looking in the Tech Tips Knowledge Base section of the community. Article is titled " ".
Alternatively, you can connect directly to the webinar at its Google Hangouts on Air link:
Just a quick reminder that the Tech Tip Webinar starts in 30 minutes, for live attendees. You will be able to ask questions in the viewing window, and also we'll be watching the Knowledge Base article for questions posted there. See you soon!