cancel
Showing results for 
Search instead for 
Did you mean: 

PLM Connection 2013, Dallas - conference prep

Siemens Valued Contributor Siemens Valued Contributor
Siemens Valued Contributor

PLM Connections Banner

 

We're heading to Dallas to learn more about PLM. The conference covers a wide range of the PLM spectrum, but we’re focusing on PLM for part manufacturing. This includes topics such as NC programming, CMM inspection, and CAM data management. We’ll be in the NX CAM Track until Thursday, when the conference ends.

 

In addition to the plenary / keynote presentations, we have a nice mix of sessions lined up by experts from Siemens PLM and customers. This is the NX CAM Track agenda:

 

Day One - Monday, June 3

  • NX CAM & Part Manufacturing Strategic Direction & Roadmap - Mike Fair, Siemens PLM
  • Part Manufacturing Solution Overview - Dave Madeley, Siemens PLM
  • Racing through the Machine Shop - Mark Bringle, Joe Gibbs Racing

Day Two - Tuesday, June 4

  • What's New in Usability & Selection - Mark Rief, Siemens PLM
  • What's New in 3-Axis through 5-Axis Milling - Mark Rief, Siemens PLM
  • What's New in 2.5-Axis Machining in NX CAM - Oliver Sing, Siemens PLM
  • What's New in Drilling - Oliver Sing, Siemens PLM
  • Mastering Complex 5-Axis Tool Paths - Edwin Gasparraj, Six Digma LLC
  • Implementing Feature-Based Machining - Oliver Sing, Siemens PLM
  • What's New in Turning - Mike Fair, Siemens PLM

Day Three - Wednesday, June 5

  • Non-Associative Editing: Is it for You? - Mark Rief, Siemens PLM
  • Shop Floor Connect for Teamcenter, DNC - Ralf Stetter, A+B Solutions GmbH
  • NX CAM & MRL - New Catalog & Tool Management Capabilities - Dave Madeley, Siemens PLM
  • Multiple Part Programming with NX CAM - Oliver Sing, Siemens PLM
  • Blisk Milling Case History with NX CAM Turbo Machinery Milling - Dave Madeley, Siemens PLM
  • NX CMM Inspection Programming - Steve Scigliano, Siemens PLM

Day Four - Thursday, June 6

  • CIP ER Review - Mark Rief, Siemens PLM
  • High Speed Machining versus High Efficiency Machining - Barry Kennemer, CG Tech
  • Customization Tips & Tricks - Mark Rief, Siemens PLM
  • Laser Trimming with NX CAM: Introduction - Mike Fair, Siemens PLM
  • Holemaking - Oliver Sing, Siemens PLM
  • Open Forum on Postprocessors & Simulation - Ken Akerboom, MOOG Inc.
  • CAM Open Forum

Next week be sure to keep an eye on this forum, we'll be sharing information from the conference as it unfolds.

 

Make Better Parts Faster!
Aaron Frankel (Community Manager)
7 REPLIES

Re: PLM Connection 2013, Dallas - conference prep

I'm also doing a presentation Thrusday on non-associative editing, like dividing a path or tilting the tool axis. Is it better to regenerate the operation or edit the path? We'll discuss it.

Mark Rief
Retired Siemens

Re: PLM Connection 2013, Dallas - conference prep

PLM World Member Experimenter PLM World Member Experimenter
PLM World Member Experimenter
Will it be possible to get the presentations for customers that are not able to attend?

Thanks in advance.

---
Stefan

Re: PLM Connection 2013, Dallas - conference prep

PLM World controls access to the presentations. In the past, attendees could get them imediately, non-attendees had to wait a while. See http://www.plmworld.org/Conference_Presentations for details. We will look at making some of our presentations available directly from SPLM.
Mark Rief
Retired Siemens

Re: PLM Connection 2013, Dallas - conference prep

PLM World Member Experimenter PLM World Member Experimenter
PLM World Member Experimenter

thanks Mark.

 

Especially the results of the CIP are not presented at the Austrian connection, so this would be very interesting, I think.

Re: PLM Connection 2013, Dallas - conference prep

PLM World Member Experimenter PLM World Member Experimenter
PLM World Member Experimenter

There are 1000 different ways to get a 5X tool path. There are one or two that is going to produce the result you want. Getting to the desired tool path fast requires fundamental understanding of various options provided in NX. Do we really need all these options?

 

Join the presentation and discussion at 1:45pm, Tuesday (Conf room Dallas C).

 

Re: PLM Connection 2013, Dallas - conference prep

PLM World Member Experimenter PLM World Member Experimenter
PLM World Member Experimenter

Stefan,  I will email my presentation later this week.

It is midnight, the day before, and I am still working on it Smiley Happy

Unfortunately, there is not much in there as my session is mostly a live demo.

Re: PLM Connection 2013, Dallas - conference prep

PLM World Member Creator PLM World Member Creator
PLM World Member Creator
HI
You did not had time to finish your presentation so did you have more material that you wanted to share , i thought it was a very intressting subject.
Mybe you have to redo in Orlando
/stefan blomgren
seco/sandvik
Best Regards

Stefan Blomgren, M.Sc.
Cad/Cam Applications SecoTools /Sandvik

Internet http://www.secotools.com
SWEDEN

Email stefan.blomgren@secotools.com

Learn online





Solution Information