Cancel
Showing results for 
Search instead for 
Did you mean: 

Simulation machine

Pioneer
Pioneer

Simulation machine.

Why does the machine model fall apart when I set the tool axis dynamically.

The simulation itself works fine.

1.jpg

3 REPLIES

Re: Simulation machine

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

What NX Release?

I have found some existing problem reports regarding dynamic tool axis for NX 11 and above in the solution center, that are currently worked on.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.1, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: Simulation machine

Pioneer
Pioneer
I have version 11 but the sample machines with nx work fine.

Re: Simulation machine

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

Check out the first two results of this solution center search. The machines shipping with NX seem to work fine, but those of the customer don't.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.1, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Learn online





Solution Information