Cancel
Showing results for 
Search instead for 
Did you mean: 

Support for Adveon question

Gears Phenom Gears Phenom
Gears Phenom

Is NX going to provide support for Adveon?

 

 

http://www.sandvik.coromant.com/en-us/services/engineering/pages/adveon.aspx

 

 

John Joyce, Manufacturing Engineer,
Senior Aerospace

NX 11.0.2.7 Vericut 8.0.3 - Statements and opinions are mine alone and do not reflect
the opinion of my employer or any other member of the human race
2 REPLIES

Re: Support for Adveon question

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

Adveon is similar to Teamcenter MRL, but entirely developed by Sandvik, if I am not mistaken.

 

Would you really like to have a tool library software of each and every tool vendor installed?

 

If tool vendor catalogs get available for Teamcenter MRL, you would just have one software providing all tools.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.2, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: Support for Adveon question

Gears Phenom Gears Phenom
Gears Phenom

 I am attending a demo on this next Monday and would like to hear anyone elses experience. 

We use a lot of Sandvik tools and this may help bring in the models into NX and Vericut.

John Joyce, Manufacturing Engineer,
Senior Aerospace

NX 11.0.2.7 Vericut 8.0.3 - Statements and opinions are mine alone and do not reflect
the opinion of my employer or any other member of the human race

Learn online





Solution Information