What do you think about NX CAM 9? Post a comment below and you'll get entered to WIN a hat like this!
Comment on a new feature(s), try an NX CAM 9 hands-on demo and tell us about your experience, or tell us what aspects of NX 9 you're looking forward to and why, and you'll get entered into a Giveway for a chance to WIN a hat like this.
(Oh yeah, we appreciate positive and/or constructive feedback ).
Click Reply to post your comments below. In order to do this, you'll first need to be registered in the community (if you haven't registered already, it's easy - here's how.) Once registered, you can post comments. Feel free to post as many comments as you'd like, but you'll only be entered into the giveaway once.
To enter to win, submit your comments to this message thread before November 30, 2013, 11:59pm PDT. Nine (9) participants will win. Winners will be selected on December 2, 2013.
We look forward to reading what you have to say about NX 9.
Read the official rules (attached).
*Sorry, Siemens employees and partners are not eligible to win.
The "More efficient hole drilling with feature recognition" sounds interesting. Looking forward to trying this out. Also the ability to add notes in the operations will be useful.
Production: NX 10.0.3.5, Vericut 8.0
I will be using the multiple part enhancements ASAP, time equals money. I can honestly say that coming from another company's CAM package after many years of use, NX CAM has made the programming process enjoyable again. My hair is beginning to fill back in, I no longer am pulling it out by the handfuls. Since our recent move to NX CAM, I haven't looked back once.
I'd like to see a more streamlined layout for drill and tap cycle definitions.
The current one is very neglected. I think this is an important feature and should be made more transparent.