Cancel
Showing results for 
Search instead for 
Did you mean: 

Teamcenter

Creator
Creator

Hello.

 

How to add machine to Teamcenter ?

 

Thank You.

4 REPLIES

Re: Teamcenter

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

Is this the machine geometry for IS&V?

Or something for Teamcenter Manufacturing?

or ???

Ken Akerboom Sr CAx Systems Engr, Moog, Inc.
Production: NX10.0.3.5 MP16/TC11.2
I'd rather be e-steamed than e-diseaseled


Re: Teamcenter

Creator
Creator

This is to make Post-Processor work, in NX 9 CAM.

It’s ask for machine in saved Machine directory, and we need to put

name of this machine to satisfy Post-Processor demand.

May be we can avoid this action?

Re: Teamcenter

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

You only have to add the machine kinematic model to Teamcenter if you like to use replace machine.

For post-processing only, you do not need to add the machine assembly.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.1, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: Teamcenter

Creator
Creator
Thank You.

Sincerely,

Alexander Rokhvarg.
Belcan Engineering Group LLC.
Senior Engineer.
317-860-2567 Desk
arokhvarg@belcan.com.
Rolls-Royce contact information:
Alexander.Rokhvarg@Rolls-Royce.com

Learn online





Solution Information