Cancel
Showing results for 
Search instead for 
Did you mean: 

Tool Path Visualization

Valued Contributor
Valued Contributor

Is there a way when you have IPW set to "Save as Component" and you run a series of operations that you can get only one component created after the last operation ? instead of a model after every operation

 

Mike

NX 11.0.2.7
Win 7
1 REPLY

Re: Tool Path Visualization

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

No, there is no option to collect all IPWs into one component.

I would even turn it off, if your parts are not growing too big, when the IPW is saved to the part itself.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.1, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Learn online





Solution Information