Cancel
Showing results for 
Search instead for 
Did you mean: 

Transfer role from nx10 to nx11

Pioneer
Pioneer

Hi

how do i transfer role  from nx10 to nx11?

 

Thank"s

3 REPLIES

Re: Transfer role from nx10 to nx11

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

Best is to not transfer roles from one release to another, since you will miss all the new menu entries introduced with the new release.

In general you may just copy the user.mtx file from "%APPDATA%\..\Local\Siemens\NX100" to "%APPDATA%\..\Local\Siemens\NX110".

BTW, this has been asked many times, so you should get more answers, if you search the entire community for "transfer role".

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.1, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: Transfer role from nx10 to nx11

Valued Contributor
Valued Contributor

Hi @mor5789 ,

 

1) Open NX10 and go to here: File->Preferences->User Interface (shortcut: Ctrl-2).Now here click Roles.  In this window, click New Role button to get out the NX10 role and name it to where on your desktop. This is your interface file.(extension is .mtx) You can use it NX11, NX12, ...

 

2) Now open NX11 and go to the same interface (File->Preferences->User Interface)Go to Roles again but this time click Load Role to get this role into NX11. Now you took the role into NX11.

 

3) One more step that to save this role permanently to NX11; go to Roles in Resource Bar and right click on the space in here, select New User Role and name it; you will see this name in here.

 

132.PNG

 

Have a nice day.

 

Ahmet ÜNKÜR.

 

 

Re: Transfer role from nx10 to nx11

Pioneer
Pioneer

Thank youHeart

Learn online





Solution Information