Cancel
Showing results for 
Search instead for 
Did you mean: 

Verry slow selecting face in operation

Creator
Creator

Hi CAM specialist,

 

I have problem with selecting face in zlevel operation.

Filter is settings on single face. 

More on the video less.

 

Unable to play video. Please try again later.
(view in My Videos)

 

Part is on the server, and I have my template on company server.

 

Does anyone have any idea?

 

Thank you

{Vladimir Jesensky}, {CAM}, {TFM Slovakia}


Production: {NX 12.0.01 mp02}
Testing: {EAP NX 12.0.2}
4 REPLIES

Re: Verry slow selecting face in operation

Siemens Valued Contributor Siemens Valued Contributor
Siemens Valued Contributor

Hello Vladimir Your video isn't showing. (Unable to play video)

 

Can you try to re-upload please.

Best regards

Lars Okkels
Siemens, MBG

Re: Verry slow selecting face in operation

Creator
Creator

Hi @LarsOkkels

 

I have a problem with saving the video. I've been reuploading him for more time. And still nothing.

{Vladimir Jesensky}, {CAM}, {TFM Slovakia}


Production: {NX 12.0.01 mp02}
Testing: {EAP NX 12.0.2}

Re: Verry slow selecting face in operation

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

Some attachments must be approved by a moderator first.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.1, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide

Re: Verry slow selecting face in operation

Creator
Creator

Thank you  @Stefan_Pendl

 

 

{Vladimir Jesensky}, {CAM}, {TFM Slovakia}


Production: {NX 12.0.01 mp02}
Testing: {EAP NX 12.0.2}

Learn online





Solution Information