Cancel
Showing results for 
Search instead for 
Did you mean: 

STAR-CCM+: New to CFD?

Siemens Creator Siemens Creator
Siemens Creator

In this lesson, you learn how to build a 2D airfoil simulation in STAR-CCM+ and validate the results with the NASA NACA 4412 validation.

https://steve.cd-adapco.com/articles/en_US/FAQ/Class-Supplements-for-CFD-Fluids-and-Heat-Transfer-Co...

 

This exercise helps you understand the relationship between different mesh refinements on a 2D airfoil and the effect on solution accuracy. All necessary refinements are set up in the provided simulation, you need to activate higher levels of refinement and run to explore the relationship between these refinements and solution accuracy.

https://thesteveportal.plm.automation.siemens.com/articles/en_US/FAQ/Class-Supplements-for-CFD-Fluid...

 

This exercise helps you understand the relationship between boundary placement and its effect on results, cell count, and run time.

https://thesteveportal.plm.automation.siemens.com/articles/en_US/FAQ/Class-Supplements-for-CFD-Fluid...

 

This video covers the simulation setup and mesh best practices, and also covers the run, post processing, modification of the geometry, and running of a second wing design.

https://thesteveportal.plm.automation.siemens.com/articles/en_US/Video/Subsonic-Wing-Simulation-Tuto...

 

 

 

3 REPLIES

Re: STAR-CCM+: New to CFD?

Experimenter
Experimenter

Does the Steve Portal no longer work? Did the site change for this link?

 

I can't access any of the steve.cd-adapco.com links. I get "page does not exist" errors.

Re: STAR-CCM+: New to CFD?

Siemens Creator Siemens Creator
Siemens Creator

We recently made some changes so the links will need to be updated. I plan on doing this soon, but for now this content can be found by searching the knowledge base or documentation. 

Re: STAR-CCM+: New to CFD?

Siemens Creator Siemens Creator
Siemens Creator

We recently updated the Steve Portal, I just updated the link.