Cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

Post Configurator Training Material

Siemens Legend Siemens Legend
Siemens Legend

Hello Community,

 

in the following links you will find training videos for Post Configurator. From time to time we will update them and provide new sessions and materials for using Post Configurator in an effective way.

 

Session 1 - Introduction

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 2 - UI Basic settings

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 3 - Def, UDE and Tcl editor

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 4 - Debugging Introduction

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 5 - Multichain Post Processors

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 6 - Inspect Tool/ Extended Debugging

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

Highlighted

Post Configurator Training Material

Siemens Legend Siemens Legend
Siemens Legend

Hello Community,

 

in the following links you will find training videos for Post Configurator. From time to time we will update them and provide new sessions and materials for using Post Configurator in an effective way.

 

Session 1 - Introduction

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 2 - UI Basic settings

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 3 - Def, UDE and Tcl editor

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 4 - Debugging Introduction

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 5 - Multichain Post Processors

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

 

Session 6 - Inspect Tool/ Extended Debugging

https://community.plm.automation.siemens.com/t5/NX-CAM-Postprocessor-Group/How-to-video-Post-Configu...

NX CAM Postprocessor Group
NX CAM Postprocessor Group

Members (94)