Cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

Tool ISO Parameters

Solution Partner Experimenter Solution Partner Experimenter
Solution Partner Experimenter

Hello,

Is it possible to get this Tool parameters:

 

  1. GAMP (rake angle axial) - angle between the tool rake plane and a plane parallel to the XZ-plane measured in a plane parallel to the YZ-plane
  2. GAMF (rake angle radial) - angle between the tool rake plane and a plane parallel to the XZ-plane measured in a plane parallel to the XY-plane

in this sample:

  • GAMP = 8 deg
  • GAMF = 20 deg

Thanks,
Tools.jpg

Highlighted

Tool ISO Parameters

Solution Partner Experimenter Solution Partner Experimenter
Solution Partner Experimenter

Hello,

Is it possible to get this Tool parameters:

 

  1. GAMP (rake angle axial) - angle between the tool rake plane and a plane parallel to the XZ-plane measured in a plane parallel to the YZ-plane
  2. GAMF (rake angle radial) - angle between the tool rake plane and a plane parallel to the XZ-plane measured in a plane parallel to the XY-plane

in this sample:

  • GAMP = 8 deg
  • GAMF = 20 deg

Thanks,
Tools.jpg

NX CAM Postprocessor Group
NX CAM Postprocessor Group

Members (174)