Showing results for 
Search instead for 
Did you mean: 

NX Licence update

Valued Contributor
Valued Contributor

Hi all,


Lets start.

We have some pretty old bundle (3 pcs. Node Locked):

UG10762 + UGD10810 = P1.

Problem is that today (and actually a lot of days before) this bundle is very limited. No Sheet Metal, no Rapid Prototyping and probably something else if compared even to NX Mach Designer.


We are still paying maintenance for software. I think those should have been simply converted/updated to like NX Mach Designer or NX Mach 1 Design. Otherwise - what kind of maintenance is that? Its not like I am asking Mach 3 Industrial Design with Aerospace and Shipbuilding Smiley Happy I just want to be up to date.


And yes, I have contacted our distributor. Apparently if you want those "new" components, one must buy a bundle once again. Is that really the only way?


P.S. we do not have first level support with Siemens PLM, so kinda stuck with local distributor.


Re: NX Licence update

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

We have been upgrading from MFG, P1 and P2 bundles in 2008 and only paid a small upgrade fee, due to the additional modules included in the bundles.

In our situation we were only paying the difference of the price between the old and the new bundle.

There should be no need to pay the entire price of the new bundle if you are on maintenance.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.1, FBM, MRL 3.1.7 | TcUA 10.1 MP7 Patch 0 ( | TcVis 11.4
Development: C (ITK), .NET, Tcl/Tk Testing: NX12.0 | AWC 3.4 Preparing: NX12.0

Employees of the customers, together we are strong Smiley Wink
How to Get the Most from Your Signature in the Community
NX Customization - Best Practice Guide