Showing results for 
Search instead for 
Do you mean 
Reply
Solved! Go to solution

post whole program groups on single NC archive

[ Edited ]

Hi,

 

How could I reconfigure this journal, for post-processing all program groups on a single NC file?

 

For example, DET_1 is the main program and just one NC file is created, internally post-processed are messages about DET_A and DET_B subprograms.

 

 

The code for postprocessing program groups separately,

 

 

1 REPLY
Solution
Solution
Accepted by topic author Igor
‎08-26-2015 04:32 AM

Re: post whole program groups on single NC archive

This VB.NET program has been developed to overcome a limitation of NX, which allows only one selected program group to be postprocessed.

 

It does walk the order view down below the selected program group to find the program groups that contain operations and sends those to the postprocessor.

 

If you just need the regular way to postprocess only the selected group, it is easier to record a journal and modify that to fulfill your needs.

Stefan Pendl, Systemmanager CAx, HAIDLMAIR GmbH
Production: NX10.0.3, VERICUT 8.0, FBM, MRL 3.1.4 | TcUA 10.1 MP7 Patch 0 (10.1.7.0) | TcVis 10.1
Development: VB.NET, Tcl/Tk    Testing: NX11.0 EAP, NX12.0 EAP

How to Get the Most from Your Signature in the Community