Cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Process parts by weight

Looks like its not working. I have attached for your reference.

Re: Process parts by weight

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor

I guess, you need to start with an empty table

Steffen Bangsow
freelance simulation specialist  
web: www.bangsow.eu
mail: steffen@bangsow.net

Re: Process parts by weight

Hi Steffan,

 

Perfect!! It works. Thank you for the help!!

 

Karthik Murugan

Re: Process parts by weight

Hi,

 

Thank you for the suggestion. I will try this method as well. Apprciate it!

 

Thank you

 

Karthik Murugan

Highlighted

Re: Process parts by weight

Hi Steffan,

 

All works perfect! except that, the flow stop at 1128 parts and I am not able to find the issue. It just stops, but simulation keeps running.

Note: FYI, the worker carry 6 parts at a time and moves to next station until it finishes 4 sequence processes. 

 

Would appreciate your help!

 

Thank you

Re: Process parts by weight

Gears Esteemed Contributor Gears Esteemed Contributor
Gears Esteemed Contributor
it don't stop on my computer (Plant Simulation Version 14.1.1), try to make an update
Steffen Bangsow
freelance simulation specialist  
web: www.bangsow.eu
mail: steffen@bangsow.net