In my rulestream Architecture Part family tree tab is not visibile. It is hidding behind.
How to make it visible. Attached image for reference.
Go to Solution.
Attached is a 7zipped file, storeadm.exe.
Un-7zip it to C:\ or D:\, then start a cmd (DOS) window and run it with the following commandline:
It will reset everything back to the defaults.
I got that stuff above from the PD and it helped as I hade the same problem with my customer too.
It worked out. Thank you very much. I have even reinstalled, but issue has not resolved.
Thanks for your help.