This contest is sponsored by Solid Edge, Luxion, Lenovo, and 3D Connexion. Read the rules to the right, and submit your Keyshot rendered images of Solid Edge models on the Entries tab. If you are not already a registered member of the community, you must register to enter images. You may enter multiple images, and the images may have simple (but not substantive) post edits.
We may ask to verify that models used to render winning entries are native Solid Edge models, such verification being done by submitting the model for inspection. We recognize that there are a lot of tools available for modeling, but this is a Solid Edge contest, and the point is to encourage Solid Edge users to be creative with your CAD data. The first step in a cool rendering is a great model. Make sure also that the model is yours and that you have rights to show it. In short, no proprietary Double Top Secret DARPA ray guns, or GrabCAD downloads, please... (Shared models may be used as background models, but the main focus of the rendering needs to be something you made.)
The winners will be announced at Solid Edge University 2016 in Indianapolis. You do not need to be present to win, but we will display winning renderings at the conference.
Register and submit your image for possible inclusion in the Solid Edge University 2016 Rendering Contest (the “Program”). Registration and entry for and into the Program must be made via the webpage http://community.plm.automation.siemens.com/t5/SEU-16-Rendering-Contest/con-p/SEU16-Rendering-Contest/tab/entries. Registration and image entries must be submitted via the website between 5:00 p.m. [EST] August 19, 2016 and 11:59 pm [EST] on October 14th, 2016. Three (3) registered entrants from the Program will receive an award.
Images will be judged by industry professionals who will consider the following: • Quality of the model (detail and visual accuracy) • Realism of the rendering • Creativity and Originality The three (3) awards are: • First Prize – Lenovo® Yoga P40 tablet, (estimated retail value $ 1722 USD) • Second Prize – Free upgrade to Keyshot® Pro 3D rendering software (estimated retail value $1,495USD) • Third Prize – 3DConnexion SpaceMouse™ Enterprise Kit (estimated retail value $(429)USD)
(the “Award” or collectively the “Awards”). Limit one Award per registered entrant. Winners are selected from all eligible entries received during the Program.,
Each winner will be notified by e-mail no later than 11:59 pm [EST] October 26, 2016. Each winner will have one week (one hundred and sixty-eight hours (168) hours) to respond to the notification to confirm acceptance of an Award. If winner has not responded to Siemens PLM Software by the conclusion of 168 hours from the time of notification, a new winner will be selected. Selection of winners will continue until a total of 3 winners respond by the conclusion of 168 hours from the time of notification. Each Award will be delivered to the address provided by entrant. The determination of winners will be conducted by Siemens PLM Software whose decision is final on all matters relating to this Event. Winners are responsible for all applicable federal, state, and local taxes. Siemens PLM Software will cover shipping costs, including international shipments. All Awards will be awarded and are non-transferable. No cash or other substitutions are allowed except by Siemens PLM Software’s sole election due to Award unavailability. Odds of receiving an Award are dependent upon the total number of entries received. Winners may be required to sign an IRS form W-9 or other tax document required under local law. If applicable, winners are responsible for all costs associated with data plan(s), Wi-Fi access and/or other use-related fees incurred in connection with use of an electronic device.
Entrants may not enter with multiple identities nor may entrants use any other device or artifice to obtain more than the maximum number of entries. Any entrant who attempts to participate multiple times or with multiple identities or uses any device or artifice to obtain more than the maximum number of entries may be disqualified. Altered, mutilated or illegible entries will be disqualified. Siemens PLM Software is not responsible for lost, late, delayed, mutilated, illegible or misdirected entries or for electronic errors. By submitting an entry for this Program, entrant agrees to abide by these official rules and any decision Siemens PLM Software makes regarding this Event. Siemens PLM Software reserves the right to disqualify from this Program, and to prosecute to the fullest extent permitted by law, any entrant or entrant who, in Siemens PLM Software’s reasonable suspicion, tampers with the entry process, intentionally submits more than a single entry or mechanical entries, violates these official rules, or acts in an unsportsmanlike or disruptive manner.
By submitting an entry for this Program, entrant (a) agrees to the decisions of Siemens PLM Software which shall be final in all respects; (b) consents to the use of entrants’ ’ name, likeness and any statements, quotes or testimonials provided by entrant for advertising and publicity purposes without further compensation, except where prohibited by law; (c) and agrees to hold harmless and fully indemnify and release Siemens PLM Software, its subsidiaries, and affiliates, and their directors, officers, employees and agents from any and all liability, damages, or causes of action (however named or described) caused by or arising out of entrant's participation or acceptance, possession or use of any Award.
If for any reason this Program is not capable of running as planned due to infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes which, in the sole opinion of Siemens PLM Software, corrupt or affect the administration, security, fairness, integrity, or proper conduct of this Event, Siemens PLM Software reserves the right to cancel, terminate, modify or suspend this Event and conduct a random drawing to award the Awards using all eligible non-suspect entries received as of the termination date. If the Event is terminated due to tampering or technical difficulties prior to its expiration date, notice will be posted at: http://www.plm.automation.siemens.com/giveaways
Siemens PLM Software is not responsible for any incorrect or inaccurate capture of information or the failure to capture such information by any of the equipment or programming associated with or utilized in this Event.
For the name of winners, mail aself-addressed stamped envelope with the words "Solid Edge Rendering Contest -" to: Siemens PLM Software 2000 Eastman Drive Milford, OH 45150 USA
The name of winners will also be posted at http://www.plm.automation.siemens.com/giveaways/. This promotion is not affiliated in any way with Lenovo, Luxion ApS, 3Dconnexion Holding S.A, or any subsidiary or affiliate of any of these companies.
This Program, the rights and obligations of Siemens PLM Software, and the rights and obligations of entrants and winners will be governed and controlled by the laws of Texas, applicable to contracts made and performed therein without reference to the applicable choice of law provisions. All actions, proceedings, and litigation relating hereto will be instituted and prosecuted solely within the State of Texas. The parties consent to the jurisdiction of the state courts of Texas and federal court located within the state and county with respect to any action, dispute, or other matter pertaining to or arising out of this promotion. Program is void where prohibited.
By entering this Program, entrant acknowledges and agrees to Siemens PLM Software’s collection and use of entrant’s personal information, such as name, address, telephone number and e-mail address, for any purpose, including but not limited to, contacting entrant from time to time to inform entrant of products, programs, services and promotions that Siemens PLM Software believes may be of interest to entrant. By entering this Program, entrant hereby acknowledges that he/she has read and accepted these Program Rules.
Lenovo is a trademark or registered trademark of Lenovo in the United States, other countries, or both. KeyShot is a registered trademark of Luxion ApS. SpaceMouse is a trademark or registered trademark of 3Dconnexion Holding S.A.Close Contact Layer Contact Siemens PLM Software 5800 Granite Parkway Suite 600 Plano, TX 75024 USA (v): +1 800 498 5351 email@example.com