Showing results for 
Search instead for 
Do you mean 

NX Hints and Tips – Rapid Sketches

by Siemens Legend Siemens Legend on ‎06-15-2012 05:09 PM

In this weeks video, we’ll show how to put together several techniques we’ve learned to create a simple gasket.

We’ll create a sketch, constrain it, then revolve it.

Next week, we’ll create the same gasket, but we’ll use some NX shortcut keys.

Remember, all the NX8 Hints and Tips video's can be found here, or in the NX8.0 help pages.

P.S. Thanks again to our NX Technical Documentation Team for putting together these videos