cancel
Showing results for 
Search instead for 
Did you mean: 

Solid Edge Tips and Tricks are back! New users start here

Community Admin Community Admin
Community Admin

After a brief hiatus, we are resuming our Solid Edge Tips and Tricks series with 10 new videos. Check back weekly to see new videos.

We begin the series with Helpers, designed for new users. 'Helpers' provide hints and explanations as you learn the system, allowing you to be productive as you learn Solid Edge.



Note: The video above is from YouTube. If you subscribe to Siemens PLM channel, you can be notified right away when we post the latest video from our Tips & Tricks series. There is a playlist on YouTube just for the Tips & Tricks, check it out here. We also realize that some of you do not have access to YouTube, so you can always check out the Solid Edge Demo Page.