Showing results for 
Search instead for 
Do you mean 

Webinars of the month - June 2016

by Community Manager Community Manager ‎05-26-2016 10:00 AM - edited ‎05-26-2016 10:06 AM

Highlight

 

Balance productivity and energy-efficiency of industrial machinery
On-demand webinar
Growing social awareness of energy issues, increased electricity prices and fierce international competition force machinery manufacturers to deliver energy-efficient and high-performance products. The model-based systems engineering (MBSE) approach becomes critical to design machines with maximum throughput and accuracy, as well as minimum down-time and operational costs. In the context of increased system interconnection and controls expansion, MBSE enables you to optimize all the mechanical aspects, electronics and software in a unique, integrated environment, rather than working on each area separately. 

industrial-machinery-200x150.jpgIn this on-demand webinar you will learn:

  • Balance machines’ performance and energy-consumption by predicting the multidisciplinary behavior of intelligent systems
  • Reduce fluid-borne and structure-borne noise induced by pressure and flow rate fluctuations in hydraulic systems and components
  • Model hydraulic, pneumatic or electrical actuation systems and define their impact on mechanical structures
  • Develop controls earlier and obtain more mature control strategies when entering the test phase

Watch the on-demand webinar

 

Live webinars

Introduction to durability
June 1, 11:00 a.m. EST 

  In this webinar you will learn: Durability_200x150.jpg

  • What is fatigue;
  • How to interpret typical fatigue-related curves;
  • Common approaches for fatigue estimation.

  


Register to the webinar

 

Designing energy-efficient home appliances faster with system simulation
June 2, 5, 11:00 a.m. EST

In this webinar you will learn:home_appliance200x150.jpg

  • How to virtually test the energetic performance of smart systems early in the design cycle;
  • How to detect possible maintenance issues and avoid costly products recalls;
  • How to drastically reduce the number of physical prototypes needed to get to the right design;

 Register to the webinar

  

Optimize engine cooling systems with model-based systems engineering
June 8, 11:00 a.m. EST 

Cooling_system_200x150.jpgIn this webinar you will learn:

  • How to support the design of engine cooling systems and the integration of additional heating strategies,
  • How to assess the impact of front-end module design on cooling system performance, and
  • How to evaluate the performance of new architecture and test control strategies

 Register to the webinar

 

Sound encapsulation solution for noise and vibration issues
June 22, 11:00 a.m. EST

accoustic2.jpgIn this webinar you will learn:

  • How to efficiently design sound enclosures for noise control
  • Is there a possibility to accommodate sound sources from measurement, flow based and mechanical vibrations?
  • Are there special techniques available to cover the full frequency range of interest?
  • What are the recent trends in enclosure acoustics simulation?

Register to the webinar

 

Electric motor noise modeling
June 29, 11:00 a.m. EST

electric motor noise modeling 200 x 150.jpgIn this webinar you will learn:

  • What are the noise sources in electric motors
  • How to model the noise sources and noise propagation paths
  • How to analyze sound pressure level
  • Mitigation strategies to reduce noise levels

 

 

 Register to the webinar