Curve by Table in V19?

N/A

Is Curve by Table supported in V19. I can't seem to find it.
5 REPLIES

Re: Curve by Table in V19?

N/A

Try using Command Finder. This is under the help menu and a really cool tool
that most folks don't know about. Just key in some keywords and hit go and
it will find it for you. You can also key in Pro/E, NX, Ideas, AutoCAD and
other CAD system terms and we'll find the closest Solid Edge command. Pretty
cool actually.
DS

"Patrick Flowers" wrote in message
news:4716c9a7$1@bbsnotes.ugs.com...
>
> Is Curve by Table supported in V19. I can't seem to find it.


Re: Curve by Table in V19?

N/A
Curve by Table is only available on the Surfacing toolbar from within a Part
or Sheet Metal file. It is not available in Draft.
--
Ken
http://grundey.blogspot.com
"Patrick Flowers" wrote in message
news:4716c9a7$1@bbsnotes.ugs.com...
>
> Is Curve by Table supported in V19. I can't seem to find it.


Re: Curve by Table in V19?

N/A

I must be particularly dense today, but I can't figure out for the life of me how
to enter the parts environment.
Thanks for helping a noobie...
"PellaKen" wrote:
>Curve by Table is only available on the Surfacing toolbar from within a Part
>
>or Sheet Metal file. It is not available in Draft.
>
>"Patrick Flowers" wrote in message
>news:4716c9a7$1@bbsnotes.ugs.com...
>>
>> Is Curve by Table supported in V19. I can't seem to find it.

>
>

Re: Curve by Table in V19?

N/A
Patrick,
The free Solid Edge 2D package does not have a Part environment. It is
strickly a 2D package only.
Sorry,
--
Neil Menne
Sr. CAD Designer
Lochinvar Corporation
300 Maddox Simpson Parkway
Lebanon, TN 37090
Phone: (615)-889-8901 Ext: 2233
Fax: (615)-882-2962
Email: nmenne@lochinvar.com


"Patrick Flowers" wrote in message
news:47179728$1@bbsnotes.ugs.com...
>
> I must be particularly dense today, but I can't figure out for the life of
> me how
> to enter the parts environment.
>
> Thanks for helping a noobie...
>
> "PellaKen" wrote:
>>Curve by Table is only available on the Surfacing toolbar from within a
>>Part
>>
>>or Sheet Metal file. It is not available in Draft.
>>
>>"Patrick Flowers" wrote in message
>>news:4716c9a7$1@bbsnotes.ugs.com...
>>>
>>> Is Curve by Table supported in V19. I can't seem to find it.

>>
>>
>

Re: Curve by Table in V19?

N/A
Neil is correct. I guess I should have explained that.
--
Ken
http://grundey.blogspot.com
"Neil Menne" wrote in message
news:4717a272$1@bbsnotes.ugs.com...
> Patrick,
>
> The free Solid Edge 2D package does not have a Part environment. It is
> strickly a 2D package only.
>
> Sorry,
> --
> Neil Menne
> Sr. CAD Designer
>
> Lochinvar Corporation
> 300 Maddox Simpson Parkway
> Lebanon, TN 37090
> Phone: (615)-889-8901 Ext: 2233
> Fax: (615)-882-2962
> Email: nmenne@lochinvar.com
>
>
>
>
> "Patrick Flowers" wrote in message
> news:47179728$1@bbsnotes.ugs.com...
>>
>> I must be particularly dense today, but I can't figure out for the life
>> of me how
>> to enter the parts environment.
>>
>> Thanks for helping a noobie...
>>
>> "PellaKen" wrote:
>>>Curve by Table is only available on the Surfacing toolbar from within a
>>>Part
>>>
>>>or Sheet Metal file. It is not available in Draft.
>>>
>>>"Patrick Flowers" wrote in message
>>>news:4716c9a7$1@bbsnotes.ugs.com...
>>>>
>>>> Is Curve by Table supported in V19. I can't seem to find it.
>>>
>>>

>>
>
>