How can we change the width of lines of the fill section. If I draw in 2D model view, to scale, my fill lines (normal, hatch, timber, section, etc), look great - nice and thin. I am drawing elevator shafts that are about 6 metres in height and 1.5 metres in depth. When I transfer the view into Sheet View at 1:50 scale, A4, those same fill lines become very thick and destroy the look of the drawing. They look as thick is .7, 1.0, 1.5mm.
It's so bad that I have abandoned filles all together and are using gray scale fills. Not ideal, especially for achitectural, structural drawings such as these ones. I have tried changing styles but to no effect.
I would very much appreciate any help on this subject