Could you please tell me, how to draw the countersink in 3D..? Countersink means only Angle and Depth.. (For Ex. 120ª and 1.8mm Depth). Attached files are for your reference.. Please habe a look.
Thanks in advance,
Go to Solution.
Try the following settings in the hole operation properties:
Hole Properties for only countersinkMaybe you have to change the hole diameter depending on the depth desired.
Sorry for my Spanish UI.
Héctor Pelayo IzquierdoEngineering Department, JAE Ingeniería y Desarrollos, S.L.Solid Edge ST9 MP5 | NX 9Development: VB.NET
Thanks you so much.. Its working fine for me..