Cancel
Showing results for 
Search instead for 
Did you mean: 

download link

N/A

I registered as student for free download and I already received a welcome message in my email, but I can not find the download link any where in that page.
any clues will be appreciated
Thank you

13 REPLIES

Re: download link

N/A
Asked many times before, and answered by many user, what is wrong with the
links that they send out to the students?
http://dl1.plm.automation.siemens.com/solidedge/SolidEdgeV104ENGLISH_32Bit.exe
Link above is suggested many times
Alternative replace the 1 with a 2
http://dl2.plm.automation.siemens.com/solidedge/SolidEdgeV104ENGLISH_32Bit.exe
Reg.

Jan
"dangthieulouis@hotmail.com"

wrote in message
news:dangthieulouishotmail.com.5at800@noreply.bbs.industrysoftware.automation.siemens.com...
>
> I registered as student for free download and I already received a
> welcome message in my email, but I can not find the download link any
> where in that page.
> any clues will be appreciated
> Thank you
>
>
> --
> dangthieulouis@hotmail.com
> ------------------------------------------------------------------------
> dangthieulouis@hotmail.com's Profile:
> http://bbs.industrysoftware.automation.siemens.com/vbulletin/member.php?userid=419514
> View this thread:
> http://bbs.industrysoftware.automation.siemens.com/vbulletin/showthread.php?t=48783
>

Re: download link

N/A
Também não consegui baixar, aparece um erro dizendo que não consegue ler o arquivo do servidor de origem

Re: download link

N/A
Oi Jaco,
O link fornecido abaixo parece estar funcionando
http://dl2.plm.automation.siemens.com/solidedge/SolidEdgeV104ENGLISH_32Bit.exeRegards,Jan"JACO.SANTO... wrote in messagenews:JACO.SANTOSPMM.AM.GOV.BR.5avlnb@noreply.bbs.industrysoftware.automation.siemens.com...>> Também não consegui baixar, aparece um erro dizendo que não consegue> ler o arquivo do servidor de origem>>> --> JACO.SANTOS@PMM.AM.GOV.BR> ------------------------------------------------------------------------> JACO.SANTOS@PMM.AM.GOV.BR's Profile:http://bbs.industrysoftware.automation.siemens.com/vbulletin/member.php?userid=417878> View this thread:http://bbs.industrysoftware.automation.siemens.com/vbulletin/showthread.php?t=48783>

Re: download link

N/A
To Jan Bos:

I Followed your link and clicked on it. It was selected to be dowloaded to my "C" drive. Then I right clicked on it to open , It said "file corrupted, extraction failed". It still had 525,xxx Kbytes on it.
I went to "add and remove program" in the control panel, there is nothing there.

I am wondering what is wrong

Anybody know?

Re: download link

N/A
Where are you located?

If you are in the US, you can contact me directly and I will see if I can provide some assistance.

Re: download link

N/A
Hello I opened the link to download Yohji solid, now it is not available. How do I get another link? Thank you.

Re: download link

N/A
já consegui instalar mas mostra um erro ...diz: voce não tem nenhuma licença valida.
Oi Jaco,

O link fornecido abaixo parece estar funcionando

http://dl2.plm.automation.siemens.com/solidedge/SolidEdgeV104ENGLISH_32Bit.exeRegards,Jan"JACO.SANTO... wrote in messagenews:JACO.SANTOSPMM.AM.GOV.BR.5avlnb@noreply.bbs.industrysoftware.automation.siemens.com...>> Também não consegui baixar, aparece um erro dizendo que não consegue> ler o arquivo do servidor de origem>>> --> JACO.SANTOS@PMM.AM.GOV.BR> ------------------------------------------------------------------------> JACO.SANTOS@PMM.AM.GOV.BR's Profile:http://bbs.industrysoftware.automation.siemens.com/vbulletin/member.php?userid=417878> View this thread:http://bbs.industrysoftware.automation.siemens.com/vbulletin/showthread.php?t=48783>

Re: download link

N/A
Voce pode me ajudar?
não consigo colocar pra funcionar o solid Edge student...aparece um erro e até agora não consegui nada..

QUOTE=kcorbridge;221691]Where are you located?

If you are in the US, you can contact me directly and I will see if I can provide some assistance.

Re: download link

N/A
Aguém me ajude com Solid Edge..não consigo executa-lo, aparece um erro e diz que não tenho licença..