Using Beginner Solid Edge

PLM World Member Valued Contributor PLM World Member Valued Contributor
PLM World Member Valued Contributor

My 11 Year Grandson Is Interested In Doing Solid Edge,

We Are Working On The Micrometer And We Are Stuck On The Design Intent To Extrude The Main Body We Tried NumerousTimes To Show The Anvil.

We Are Missing A Step Someplace.

Any Thoughts

 

http://screencast.com/t/xzOnXGtnSJN

 

Thank You

GregoryLee

3 REPLIES

Re: Using Beginner Solid Edge

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

At first glance, it looks like you have made the cylindrical face (one with the hole in it) tangent to the face you are trying to move. Go back a few steps and make sure these faces are not tangent.

Re: Using Beginner Solid Edge

PLM World Member Valued Contributor PLM World Member Valued Contributor
PLM World Member Valued Contributor

To Be Quite Frank With You...

I've Been Getting That Command...Here Of Resent. Basically I'll Just Redo That Part And Go Around That Command. I Do Not Even Know How This Command Even Works.

And With Your Terminology All French To Me.

 

Beg My Parden

GregoryLee 

Re: Using Beginner Solid Edge

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

The hole feature was not concentric with the cylidrical face.Open the attached PDF file and follow the instructions.