Showing results for 
Search instead for 
Do you mean 

V2 Rocket

by Enthusiast on ‎04-29-2017 05:12 PM

Hello!  My name is Katie, and I am studying Aerospace Engineering at the University of Alabama in Huntsville.  I designed a Vergeltungswaffe 2, commonly known as the V2 rocket, using Solid Edge.

 

I started by building the outside of the rocket first and then worked my way inwards.  That way, when I was building the assembly, I would automatically know if the parts were too big and could adjust immediately to save time.  After building the exterior of the rocket, I designed the combustion chamber which I considered the most complex part.  All my other parts were designed around the combustion chamber.

 

 

Combustion_Chamber.jpg

 

 

V2_Rocket_Bottom.jpg

 

 

V2_Rocket_Cutout.jpg

 

 

V2_Rocket_Top.jpg