Cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Export Step Files for NX10 Not Working

Siemens Esteemed Contributor Siemens Esteemed Contributor
Siemens Esteemed Contributor
That's your STEP translation log. I'm referring to your NX syslog - that's where the error occurs when you attempt to open the exported STEP data. You can get to this by selecting "Help > Log File" from your NX session, but make sure you reproduce the problem before you post the log.

Ben Broad | PLM Enthusiast | Siemens GCSS

NX (v17 - 1876) | Teamcenter (9 - 12)
Value Based Licensing | Adaptive UI | BETA Registration

Re: Export Step Files for NX10 Not Working

Valued Contributor
Valued Contributor

Alright I got the log file...its very long.

 

I have attached the log file. I opened it right after the export file completed. I do not get an error message in NX for the file export, but rather when I go to open the exported file itself, so I opened the log after the export seemed to complete.

Re: Export Step Files for NX10 Not Working

Valued Contributor
Valued Contributor
I searched for the word "Failed" and I did find a few but not sure what a solution could be. Maybe my environmental variables?

Re: Export Step Files for NX10 Not Working

Siemens Esteemed Contributor Siemens Esteemed Contributor
Siemens Esteemed Contributor
Since you do not get any errors exporting the STEP file, you need to import the STEP, reproduce the error and then post a copy of your syslog.

Ben Broad | PLM Enthusiast | Siemens GCSS

NX (v17 - 1876) | Teamcenter (9 - 12)
Value Based Licensing | Adaptive UI | BETA Registration

Re: Export Step Files for NX10 Not Working

Valued Contributor
Valued Contributor
Oh duh I'm sorry. I will do that and post it.

Re: Export Step Files for NX10 Not Working

Valued Contributor
Valued Contributor

Ok here is the open log file

Re: Export Step Files for NX10 Not Working

Valued Contributor
Valued Contributor

Could it be my load options?

 

I am able to open a STEP file when someone else exports it on their machine. For some reason my machine creates a STEP I can't open nor can anyone else on their machine.

Re: Export Step Files for NX10 Not Working

Siemens Esteemed Contributor Siemens Esteemed Contributor
Siemens Esteemed Contributor
In this particular case, yes, it's your load options.
The file was saved here: C:\Users\usx29106\Desktop\Nuvera eProof\Files for Razuna - 1-31-2017\

You're attempting to load from here:
C:\Users\usx29106\AppData\Local\Temp...

Edit your search folders to include: C:\Users\usx29106\Desktop\Nuvera eProof\Files for Razuna - 1-31-2017\ and you should be able to load the step data (at least, this is the first hurdle you need to resolve). Did you get the originally raised message: "Failed to open document"?

Ben Broad | PLM Enthusiast | Siemens GCSS

NX (v17 - 1876) | Teamcenter (9 - 12)
Value Based Licensing | Adaptive UI | BETA Registration

Re: Export Step Files for NX10 Not Working

Valued Contributor
Valued Contributor
Possibly uninstalling and reinstalling again made a difference, because now the file sizes seem to be better (they are now in the hundreds of kbs, before the files were only 5-10 kb in size and the files open up...i dunno. thank you though