Cancel
Showing results for 
Search instead for 
Did you mean: 

Opening DWG files on Teamcenter

Solution Partner Valued Contributor Solution Partner Valued Contributor
Solution Partner Valued Contributor

Hi guys,

 

Can we open DWG/DXF files on the Viewer in Teamcenter?

 

Cem

39 REPLIES 39
Highlighted

Re: Opening DWG files on Teamcenter

Experimenter
Experimenter
The site preference defaultViewerConfig.VIEWERCONFIG need to have values added to handle the image types you require. For example for the embedded viewer to view drawing, CGM, Tiff & PDF files, we added the following values. Site Preference: defaultViewerConfig.VIEWERCONFIG Values: Image.TCTwoDViewer=Image,CGM_Reference FGA_PDF.TCTwoDViewer=PDF_Reference,PDF,acrobat CGM.TCTwoDViewer=CGM_Reference FGA_Tagimage.TCTwoDViewer=tagimage DrawingSheetProxy.DrawingViewer Drawing.DrawingViewer

Re: Opening DWG files on Teamcenter

Solution Partner Valued Contributor Solution Partner Valued Contributor
Solution Partner Valued Contributor
I also did that but what should we enter to cover DWG files?

Cem

Re: Opening DWG files on Teamcenter

Valued Contributor
Valued Contributor

I was wondering if you ever figured out how to view dwg files in the viewer?

Jake

Re: Opening DWG files on Teamcenter

Solution Partner Valued Contributor Solution Partner Valued Contributor
Solution Partner Valued Contributor
Nope :)

Best Regards,

Cem ALPAY, Managing Partner
UCGEN YAZILIM LTD. STI.
TEL: 0216 550 52 06

Re: Opening DWG files on Teamcenter

Siemens Genius Siemens Genius
Siemens Genius

Hi Cem,

 

Try adding the following value to the Teamcenter Preference: defaultViewerConfig.VIEWERCONFIG

 

Preference Name: defaultViewerConfig.VIEWERCONFIG

Value: DXF.TCTwoDViewer=DXF

 

Regards,

Arun Kumar G

Re: Opening DWG files on Teamcenter

Solution Partner Valued Contributor Solution Partner Valued Contributor
Solution Partner Valued Contributor
What about DWG?
Can it be done like the same?

Saygılarımla,

Cem ALPAY, Yönetici
ÜÇGEN YAZILIM LTD. ŞTİ.
TEL: 0216 550 52 06

[cid:image001.jpg@01D1F9FC.A6391A50]

Re: Opening DWG files on Teamcenter

Siemens Genius Siemens Genius
Siemens Genius

I'm not sure but try adding another value DWG.TCTwoDViewer=DWG, {"Reference" from Drawing dataset named Reference)

Re: Opening DWG files on Teamcenter

Valued Contributor
Valued Contributor

The files I would like to view are acutally .qaf.  It allows you a very small preview on the summary tab, but I want to see a larger image in the viewer.  Our current work around is to convert the qaf to pdf to see in viewer.

Jake

Re: Opening DWG files on Teamcenter

Siemens Esteemed Contributor Siemens Esteemed Contributor
Siemens Esteemed Contributor
Hi Jake, try these:

qaf files:
UGMASTER.TCTwoDViewer=UG-QuickAccess-Binary
UGPART.TCTwoDViewer=UG-QuickAccess-Binary

dxf/dwg:
DXF.TCTwoDViewer=DXF
ACADDWG.TCTwoDViewer=DWG

Regards, Ben

Ben Broad | PLM Enthusiast | Siemens GCSS

NX (v17 - 1876) | Teamcenter (9 - 12)
Value Based Licensing | Adaptive UI | BETA Registration