Cancel
Showing results for 
Search instead for 
Did you mean: 

Animation Control

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

 

 

Animation Control

NX CAM 12.0.1

Overview

The new Animation group on the Home tab in the Ribbon Bar includes a variety of options that you can use when viewing tool paths.

 

Image1.gif

 

Video

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

 

 

Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

Comments
Pioneer
Pioneer

Looks good.  Any chance the 1-10 speed selection will be a slider in the future, to follow lessons learned about speed selection over the years?   Slow--------------------------------Fast.

 

Contributors
LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.