Cancel
Showing results for 
Search instead for 
Did you mean: 

Avoid Unneeded Interference Warnings When Making Threads

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Gouge reporting for tapping and thread milling now avoides unneeded interference warnings

 

Overview

Gouges are no longer reported for Tapping, Thread Milling, and Boss Thread Milling operations due to material being removed from the threaded volume.

 

Image1.gif

 

Created with NX CAM 9.0.2

 

Details

Gouges are no longer reported for Tapping, Hole and Boss Thread Milling.

 

To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

 

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.