Non Cutting Moves for thread turning operations now has the ability to Infeed at a specific angle and length when engaging. This is sometimes needed to avoid an obstruction at the end of a tapered thread.
Created with NX CAM 9
Learn how to use Infeed and Angle when engaging, and Local Return moves for roughing and finishing.
Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)
About the Author
Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.