Showing results for 
Search instead for 
Did you mean: 

Better Engages and Retracts for Odd Shaped Regions - Specify Minimum Clearance

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Minimum Clearance in Non Cutting Moves



You now have more control over how the Minimum Clearance Distance is applied when engaging and retracting. This is particularly useful when engaging and retracting to and from an irregular shape.




Created with NX CAM 10.0.3



Extending engages and trimming retracts to a specified Minimum Clearance Distance allows you to avoid plunging into rough material when engaging and wasting motion when retracting from an irregular shape.




(view in My Videos)


(If you have problems with the embedded player, you can download the attached .mp4 file.)



Save the attached part file locally and follow the instructions in the .pdf document.


Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.