Showing results for 
Search instead for 
Did you mean: 

Chamfer a Wide Variety of Holes Quickly

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Use Hole Chamfer Milling to quickly chamfer a wide variety of holes



Hole Chamfer Milling allows you to machine modeled and non-modeled chamfers of different diameters.




Created with NX CAM 9.0.2



Using the new Hole Chamfer Milling operation subtype to machine chamfers on holes.


To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.


Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author


Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.