Cancel
Showing results for 
Search instead for 
Did you mean: 

Coolant for Open and Closed Areas

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

 

Coolant for Open and Closed Areas

NX CAM 

 

Coolant options can now be specified separately for Open and Closed Areas in Planar, Cavity, Floor and Wall, and Adaptive Mill Operations.

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

 

Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.