You can now copy CAM operations and parent group information from a component to a CAM setup.
Created with NX CAM 11.0.1
Copying all operations and Tool, Method, Geometry, and Program parent object information from a part file to a CAM setup allows you to define CAM information once and reuse it multiple times in different locations to save programming time.
(If you have problems with the embedded player, you can download the attached .mp4 file.)
Save the attached part file locally and follow the instructions in the .pdf document.
Do you have a question about this topic?
Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)
About the Author
Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.