Cancel
Showing results for 
Search instead for 
Did you mean: 

Custom Feeds and Speeds

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

 

Custom Feeds and Speeds

NX CAM

 

Custom Feed and Speed parameters for closed area engages can now be specicied in Cavity Mill, Rest Milling, Corner Rough, Floor and Wall, and Planar Mill operations.

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

 

Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.